Full Command List - CYP CPLUS-1082CVEA Operation Manual

• Combined Audio and Video Routing Command Example
It is also possible to switch audio and video simultaneous by using an
advanced command structure. In this case the individual parameters
of the "HDBT_Out" command are separated by a comma. Please
check section 6.8.1 for additional information on how commands can
be combined.
Route audio and video from HDMI input 1 to HDBaseT output A
simultaneously:
COMMAND
HDBT_Out A VideoSrc=HDMI_In 1,
AudioSrc=HDMI_In 1
Every individual audio and video input has a bespoke command
(including separate commands for the audio and video within a HDMI
source).

6.8.3 Full Command List

COMMAND
ZoneLineOut M AudioSrc=XXX
ZoneLineOut M Treble=XXX
DESCRIPTION
Video and Audio switch
command
DESCRIPTION
Set the audio source for a
zone line output.
M = A~H
Available XXX values:
HDMI_In n [n=1~10]
OpticIn n [n=1~2]
CoaxIn n [n=1~2]
AnalogIn n [n=1~4]
OAR_In n [n=A~H]
CAT_In n [n=1~2]
MixerOut n [n=1~3]
Set the treble value for a zone
line output.
M = A~H
XXX = -12~+12 (units: dB)
17