CYP CPLUS-1082CVEA Operation Manual page 31

COMMAND
HDMI_In M Name={NameString}
MixerOut M AudioSrc N=XXX
MixerOut M Gain N=XXX
MixerOut M Mono
DESCRIPTION
Set the verbose name of an
HDMI input. Maximum 32
characters.
M = 1~10
Note: Can only rename one
port at a time. Multi-port is not
supported.
Set the audio source for an
audio mixer input channel.
M = 1~3
N = A~B
Available XXX values:
HDMI_In n [n=1~10]
OpticIn n [n=1~2]
CoaxIn n [n=1~2]
AnalogIn n [n=1~4]
OAR_In n [n=A~H]
CAT_In n [n=1~2]
Set the gain level of an audio
mixer input channel.
M = 1~3
N = A~B
XXX = 0~100 (units: %)
Set the output of a mixer
channel to "mono" mode.
Left and right channel outputs
will be the same.
M = 1~3
25