CYP CPLUS-1082CVEA Operation Manual page 30

COMMAND
HDBT_Out M Unmute
HDBT_Out M VideoSrc=XXX
HDBT_Out M VideoSrc=Pattern
HDBT_Out M VideoSrc=Default
HDBT_Out M Status
HDBT_Out M Name={NameString}
HDMI_In M Status
24
DESCRIPTION
Unmute an HDBaseT output's
audio.
M = A~H
Set the video source for an
HDBaseT output.
M = A~H
Available XXX values:
HDMI_In n [n=1~10]
Set the video source of an
HDBaseT output to the internal
test pattern.
M = A~H
Reset the video source of
an HDBaseT Tx output to the
factory default.
M = A~H
Display the status & properties
of an HDBaseT output
including audio/video matrix.
M = A~H
Set the verbose name of an
HDBaseT output. Maximum 32
characters.
M = A~H
Note: Can only rename one
port at a time. Multi-port is not
supported.
Display the status of an HDMI
input.
M = 1~10