CYP CPLUS-1082CVEA Operation Manual page 40

10×10 hdmi/hdbaset matrix with audio matrixing & lan serving

Table of Contents

Once in the CLI (Command Line Interface) type "Telnet" followed by

the IP address of the unit and "23", then hit "Enter".

This will connect us to the unit we wish to control. Type "help" to list the

available commands.

Note: Commands will not be executed unless followed by a carriage

return. Commands are not case-sensitive. If the IP address is changed

then the IP address required for Telnet access will also change

accordingly.

Table of Contents

Need help?

Do you have a question about the CPLUS-1082CVEA and is the answer not in the manual?