COMMAND
MixerOut M Stereo
MixerOut M Status
SETIP {IP} {Subnet} {Gateway}
RSTIP
IPCONFIG
P0
P1
P2
P?
PRESET Save M
PRESET Load M
26
DESCRIPTION
Set the output of a mixer
channel to "stereo" mode.
M = 1~3
Display the status of a mixer
channel.
M = 1~3
Set the IP address, subnet and
gateway in Static IP mode.
Address format: xxx.xxx.xxx.xxx
Request updated IP
information from the DHCP
server.
Display the current IP
configuration.
Enter light stand-by mode.
(RS-232, Ethernet and PoH
functionality is still active.)
Turn the power on.
Enter deep stand-by mode.
(Only RS-232 functionality is still
active.)
Report the current power
status.
Save the current A/V routing
as a preset.
M = 1~8
Load and activate a saved
A/V preset.
M = 1~8
Need help?
Do you have a question about the CPLUS-1082CVEA and is the answer not in the manual?