Full Command List - CYP CPLUS-662CVEA Operation Manual

• Combined Audio and Video Routing Command Example
It is also possible to switch audio and video simultaneous by using an
advanced command structure. In this case the individual parameters
of the "HDBT_Out" command are separated by a comma. Please
check section 6.8.1 for additional information on how commands can
be combined.
Route audio and video from HDMI input 1 to HDBaseT output A
simultaneously:
COMMAND
HDBT_Out A VideoSrc=HDMI_In 1,
AudioSrc=HDMI_In 1
Every individual audio and video input has a bespoke command
(including separate commands for the audio and video within a HDMI
source).

6.8.3 Full Command List

COMMAND
Help
?
Help {Command}
? {Command}
SaveMuteSetting ?
SaveMuteSetting XXX
DESCRIPTION
Video and Audio switch
command
DESCRIPTION
Display all available
commands. (Except hidden
commands.)
Display all available
commands. (Except hidden
commands.)
Detailed description of the
specified command.
Detailed description of the
specified command.
Display the current Save Mute
Setting configuration.
Allow or disallow saving the
audio mute setting when the
unit is powered off.
XXX = "On" or "Off"
17