CYP CPLUS-1082CVEA Operation Manual page 38

COMMAND
IR_Route IR_Out M0 M1 M2
IR_Route IR_Out M0 Show
? {Command}
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
32
DESCRIPTION
Select the IR source(s) for an
IR Output jack (next to each
HDMI input).
M0 is the output port index.
M1 is the function to use.
M2 is the IR input source.
M0 = 1~10 (supports multiple
port selection by using "+".)
Available M1 values:
Add [Add M2 source to M0]
Del [Remove M2 source from
M0]
Available M2 values:
IR_InAll [IR In (ALL) input jack]
Generator [Internal IR
encoder]
Display the current IR source
for an IR Output jack (next to
each HDMI input).
M0 = 1~10 (supports multiple
port selection by using "+".)
Display basic instructions for
the command.