CYP CPLUS-1082CVEA Operation Manual page 24

COMMAND
ZoneLineOut M Bass=XXX
ZoneLineOut M Volume=XXX
ZoneLineOut M Volume=Fast XXX
ZoneLineOut M Volume=Slow XXX
ZoneLineOut M Delay=XXX
ZoneLineOut M Mute
ZoneLineOut M Unmute
ZoneLineOut M Status
18
DESCRIPTION
Set the bass value for a zone
line output.
M = A~H
XXX = -12~+12 (units: dB)
Set the volume for a zone line
output.
M = A~H
XXX = 0 ~ -100 (units: dB)
Adjust the volume of a zone
line output in large steps (2dB
steps).
M = A~H
XXX = "Up" or "Down"
Adjust the volume of a zone
line output in small steps
(0.5dB steps).
M = A~H
XXX = "Up" or "Down"
Set the audio delay for a zone
line output.
M = A~H
XXX = 0~230 (units: ms)
Mute a zone line output.
M = A~H
Unmute a zone line output.
M = A~H
Display the status of a zone
line output.
M = A~H