Table of Contents
Advertisement
Enter/Exit Programming Mode
Set String ID
Sets the identifier of the predefined strings.
$CPWEB
Set String ID
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Set String Header
Sets the header of the predefined strings.
$CPWED
Set String Header
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
256
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 6 digits from the Alphanumeric
Appendix D, Keypad
characters in
The ID characters must be represented by their hexa-
decimal ASCII code; if the first 2 digits are 0, this fea-
ture is disabled. End by scanning the ENTER/EXIT bar
code again.
~
CANCEL
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 32 digits from the Alphanumeric
Appendix D, Keypad
characters in
The digits must be the hexadecimal ASCII representa-
tion of the desired characters. If less than the
expected string of 16 characters are selected, scan the
ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
.
.
Advertisement
Table of Contents
