Upc-A 2D Component; Upc-E; Upc-E Enable/Disable - Datalogic PowerScan PBT950X Product Reference Manual

Enter/Exit Programming Mode

UPC-A 2D Component

This feature enables/disables a requirement that a 2D label component be
decoded when a base label of this symbology is decoded.
DEFAULT
EAN-13 2D Component =
Disable (2D component not required)
EAN-13 2D Component =
2D component must be decoded

UPC-E

The following options apply to the UPC-E symbology.

UPC-E Enable/Disable

When disabled, the reader will not read UPC-E bar codes.
UPC-E = Disable
DEFAULT
UPC-E = Enable
86 PowerScan™ PD953X/PBT950X/PM950X