Changing From Compatible Mode Back To Normal - Datalogic PowerScan PBT950X Product Reference Manual

BC9xxx Base
The BC9xxx can be changed from Normal to Compatible mode using the
Aladdin configuration tool. See
information. This will allow you to Join or Bind a PM8500 to your BC9xxx.

Changing from Compatible Mode back to Normal

PM950X Handheld
1. With the PM950X, read a Compatible mode programming label on
2. With the PM950X, read the Unlink programing label.
3. Now you can link your PM950X to a BC9xxx in normal mode; the
BC9xxx Base
1. Using Datalogic Aladdin, change the Compatible Mode parameter to
2. Now you can link a previously unlinked PM950X; the reader will inherit
If Aladdin is not available, use the following procedure:
1. With a PM950X in normal mode, read the Unlink programming label on
2. Place the same PM950X on your BC9xxx.
Your BC9xxx will link to the PM950X and will inherit the reader's pro-
grammed speed.
Product Reference Guide
page 238 with a value of "Low, Medium, or High Speed".
PM950X will inherit the programmed speed from the BC9xxx.
"Low, Medium, or High Speed".
the speed programmed in the BC9xxx.
page 18, then read the following bar code:
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Enter/Exit Programming Mode
"Datalogic Aladdin™"
Return to Normal
on page 6 for more
239