Arrow Up String (4-Key Models Only); Arrow Down String (4-Key Models Only) - Datalogic PowerScan PBT950X Product Reference Manual

Enter/Exit Programming Mode

Arrow Up String (4-key models only)

Associate a pre-defined string to the Arrow Up key
$CDAUS
Set string for Arrow Up Key
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Arrow Down String (4-key models only)

Associate a pre-defined string to the Arrow Down key
$CDADS
Set string for Arrow Down Key
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
250
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
Define the label string by further scan-
code at left.
ning 32 digits from the Alphanumeric characters
Appendix D, Keypad
in
The digits must be the hexadecimal ASCII represen-
tation of the desired characters; if less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
End by scanning the ENTER/EXIT bar code again.
~
CANCEL
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left. Define the label string by further scan-
ning 32 digits from the Alphanumeric characters in
Appendix D, Keypad
.
The digits must be the hexadecimal ASCII represen-
tation of the desired characters; if less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
End by scanning the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
.