Aztec Code Set Length 2 - Datalogic PowerScan PBT950X Product Reference Manual

2D Global Features

Aztec Code Set Length 2

This feature specifies one of the bar code lengths for
Control. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Length Mode. Characters can be set
from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 282
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
for detailed instructions on setting this feature.
Length 2 is 3,832 Characters
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
Aztec Code Length
repre-
179