Enter/Exit Programming Mode
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
DEFAULT
$CMXEN01(CR)
Maxicode = Enable
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the
Secondary Message is not readable.
DEFAULT
$CMXPT01(CR)
Maxicode Primary Message Transmission = Enable
186
MAXICODE
$CMXEN00(CR)
$CMXPT00(CR)
Maxicode Primary Message Transmission = Disable
PowerScan™ PD953X/PBT950X/PM950X
2D Global Features
Maxicode = Disable