Table of Contents
Advertisement
Scanning Features
Scanning Features
Scan Mode
This mode is associated with typical handheld reader operation. Selects the
scan operating mode for the reader. The following selections are valid for all
models:
Trigger Single:
the following occurs:
Trigger Hold Multiple:
product scans until the trigger is released or
elapsed. Reading a label does not disable scanning.
prevents undesired multiple reads of the same label while in this mode.
Trigger Pulse Multiple:
vated until
released and pulled again.
ple reads of the same label while in this mode.
Flashing:
rate is controlled by
imager reads continuously; when Flash is OFF scanning is deactivated.
Always On:
ually on. If the trigger is pulled, the reader acts as if it is in Trigger Single
Mode.
label while in this mode.
Stand Mode:
on automatically when an item is placed in the reader's field of view.
Read Timeout
Product Reference Guide
When the trigger is pulled, scanning is activated until one of
Scanning Active Time
-
- a label has been read
- the trigger is released
When the trigger is pulled, scanning starts and the
When the trigger is pulled, continuous scanning is acti-
Scanning Active Time
The reader flashes on and off regardless of the trigger status. Flash
Flash On Time
No trigger pull is required to read a bar code. Scanning is contin-
Double Read Timeout
No trigger pull is required to read a bar code. Scanning is turned
prevents undesired multiple reads while in this mode.
has elapsed
Scanning Active Time
has elapsed or the trigger has been
Double Read Timeout
and
Flash Off
prevents undesired multiple reads of the same
has
Double Read Timeout
prevents undesired multi-
Time. When Flash is ON the
Double
293
Advertisement
Table of Contents
