Other Bt Features; Bluetooth Hid Variable Pin Code - Datalogic Gryphon I GM440 Series Product Reference Manual

Bluetooth HID Variable PIN Code

Specifies the selection available for Static or Variable Pin Code, when Bluetooth
HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
require a Variable PIN Code. When attempting connection, the application pres-
ents a window that includes a PIN Code which is to be input using the Gryphon
GBT4400. Scan the bar code "Variable PIN Code" below, then use the host com-
puter's Bluetooth manager to "Discover new devices" and select "Datalogic
Scanner." Use a text editor to see incoming data on the port designated by the
computer's Bluetooth manager.
When you hear the beep and see the Green LED blinking indicating the reader is
waiting for an alphanumeric entry, enter the required variable PIN Code by
scanning the corresponding bar codes in
entry. Finish by scanning the Exit HID Variable PIN Code label.
$CBTHP00
Set Static Pin Code
~
Product Reference Guide

OTHER BT FEATURES

If you receive an error message, it may be necessary to disable secu-
rity on the device.
NOTE
CANCEL
Exit HID Variable PIN Code
Enter/Exit Programming Mode
Appendix D, Keypad
DEFAULT DEFAULT
$CBTHP01
Set Variable Pin code
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
for alphanumeric
253