System Connections; Rs232 Connection - Datalogic Lynx Instruction Manual

1
1.3

SYSTEM CONNECTIONS

1.3.1

RS232 Connection

The LYNX™ Reader requires the RS232 interface cable and the AC/DC power
adapter to be connected.
To install your reader to your host system, follow these instructions (see Figure 1
below).
1. Insert the cable into the bottom of the handle of the LYNX™ reader.
2. Connect the RS232 interface cable to the proper port on the host terminal.
3. Connect the power cord to the RS232 interface cable.
4. Connect the AC/DC power adapter at the wall outlet.
5. Power up your PC.
RS232 is the default interface set at the factory.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
2
Figure 1 - RS232 Connection
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
LYNX™