High/Low Limit Comparator Output; Delay Time Between Input & Output Signals - KYOWA WGA-670B-0 Instruction Manual

5-2 HIGH/LOW LIMIT COMPARATOR OUTPUT

Input Signal Input Signal
Higher limit output Higher limit output
Lower limit output Lower limit output
T1: 4ms(Max) ...................... A delay time required, starting from the time when the input value exceeds
T2: 4ms (Max) ..................... A delay time required, starting from the time when the input value lowers
T3: 4ms(Max) ...................... A delay time required, starting from the time when the input value exceeds
T4: 4ms(Max) ...................... A delay time required, starting from the time when the input value lowers
5-3 DELAY TIME BETWEEN INPUT & OUTPUT SIGNALS
Delay time between input and BCD output
Delay time between input and RS output
Delay time between input and D/A output
Higher limit Higher limit
Lower limit Lower limit
OFF OFF
T3 T3
ON ON
the high limit comparative value preset on the comparator until the high
limit output becomes ON.
by the hysteresis width from the high limit comparative value preset on the
comparator until the high limit output becomes OFF.
by the hysteresis width from the low limit comparative value preset on the
comparator until the low limit output becomes OFF.
from the low limit comparative value preset on the comparator until the low
limit output becomes ON.
Hysteresis Hysteresis
T1 T1
ON ON
OFF OFF
Maximum 4 ms (Output times: 125 times/sec)
Maximum 30 ms
Maximum 8 ms
29
Hysteresis Hysteresis
T2 T2
T4 T4