KYOWA WGA-670B-0 Instruction Manual page 39

(3) Connecting to External Devices
a) Connection cable
For connecting the WGA-670B to the PC, etc., use a commercially available RS cross cable (reverse
type).
(For reference, KRS-DOSV9C07K, KRS-403XFO7K, etc.: SANWA SUPPLY LTD. made)
(Note) Do not forget to power OFF both WGA-670B and the external devices before connection.
Or, correct operation may not be obtained or may cause damage.
b) Settings of external devices
Set the external devices by conforming to WGA-670B signal specifications.
(Note) The WGA-670B is not corresponding to XON/XOFF control and send brake signal.
WGA side
DCD DCD 1 1
RxD RxD 2 2
TxD TxD 3 3
DTR DTR 4 4
GND GND 5 5
DSR DSR 6 6
CTS CTS 7 7
RTS RTS 8 8
PC side
1 1 DCD DCD
2 2 RxD RxD
3 3 TxD TxD
4 4 DTR DTR
5 5 GND GND
6 6 DSR DSR
7 7 CTS CTS
8 8 RTS RTS
34