4-2-5-1 Arbitrary Point Hold Mode
• Press the HOLD key and after the lapse of delay time, the indication is kept hold until it is pressed the next
time.
• Or, when the [HOLD] signal from the rear terminal board is turned ON (close) and after the lapse of delay
time, the indication is kept hold until the [HOLD] is signal is turned OFF.
HOLD signal
4-2-5-2 Peak Hold Mode
• Press the HOLD key and after the lapse of delay time, the peak value is indicated until it is pressed the next
time.
• Or, when the [HOLD] signal from the rear terminal board is turned ON (close) and after the lapse of delay
time, the peak value is indicated until the [HOLD] signal is turned OFF.
HOLD signal
Press the
HOLD-SW
Indicated
value
Delay time
[HOLD] LED flickers
Close
Press the
Indicated
HOLD-SW
value
Delay time
Detecting peak value
[HOLD] LED ON
Close
Press the
HOLD-SW
Holding
Press the
HOLD-SW
23