KYOWA WGA-670B-0 Instruction Manual page 31

4-2-5-4 Time Specified Peak Hold Mode
a) Normal display mode
• Press the HOLD key and after the lapse of delay time, the peak value is detected and kept hold for the
preset specified time.
Press the HOLD key the 2nd time and the peak hold mode is canceled.
• Or, when the [HOLD] signal from the rear terminal board is turned ON (close) and after the lapse of
delay time, the peak value is detected and kept hold for the preset specified time.
When the [RESET] signal from the rear terminal is turned ON (close), the peak hold mode is canceled.
HOLD signal
RESET signal
Note) Even if no RESET signal is issued, it is reset with the next HOLD
signal.
Press the
HOLD-SW
Detecting peak value
Delay time
Specified time
[HOLD] LED ON
Close
Indicated
value
Holding
[HOLD] LED flickers
26
Press the
HOLD-SW
Close