Table of Contents
Advertisement
f) Return value of hold mode
a, b, c,x.xx,yy.yy<CR><LF>
• See SMF command.
g) Return value of auto-ZERO compensation set value
xxxxxx,y.y.z<CR><LF>
h) Optional return values
• Outputs the following according to the installed options.
01: a,b,c<CR><LF>:
02: <CR><LF>:
04: ±xxxxxx, ±yyyyyy<CR><LF>: Analog output
• When multiple options are installed, the required return values are outputted according to the multiple
options.
Contents of parameters are described in the following.
a:
b:
c:
±xxxxxx:
±yyyyyy:
(9) [GOD]
Contents:
Format:
Parameter:
Return value format:
Description & others:
(10) [VCL]
Contents:
Format:
Parameter:
Return value format:
Description & others:
Specified (second)
Delay time (second)
Comparison mode
Display mode
Hold mode
ZERO near ZERO range
Definition time
Indicates ZERO range and indicated value with a decimal point. If the indicated
value has no decimal point, it is filled with '0' from the head.
BCD
RS-232C+TEDS
BCD Data output logic
BCD EOC output logic
BCD Number of output times
Indicated value at 0 V analog output
Indicated value at 10 V analog output
Indicates the original value. (Relevant to panel operation F-01)
GOD<CR>
None
D0±0x.xxx<CR><LF>
Return value ±0x.xxx is input value with unit mV/V.
Conducts actual load calibration (Relevant to panel operation F-02)
VCL±xxxxxx<CR>
±xxxxxx
Indicates the indicated value with a decimal point. If the
indicated value has no decimal point, it is filled with '0' from
the head.
ok<CR><LF>
When error occurs, E-00<CR><LF>
Saves the results of this command.
41
Advertisement
Table of Contents
