Operation & Function; Key Operation; Key Operation In Measuring Mode (Setting [Lock]) - KYOWA WGA-670B-0 Instruction Manual

4. OPERATION & FUNCTION

4-1 KEY OPERATION

4-1-1 Key Operation in Measuring Mode (Setting [LOCK])

• Power ON the WGA-670B and the measuring mode is activated in [LOCK] state.
• In the measuring mode, the WGA-670B measures load, pressure, torque, displacement and other physical
quantities by combining with a strain gage type transducer and indicates the measured values on the indicator.
• Various key operations in the measuring mode proceed to high limit setting mode, low limit setting mode,
function selecting mode, and to the [LOCK] state.
However, if it is in the [LOCK] state (with [LOCK] LED lit), key operations thereafter may be limited.
For details, see the following Table 4-1-1.
Table 4-1-1 Key Operation in Measuring Mode
Key Operation
Press the ZERO key for 2 seconds.
Press the HIGH key for 2 seconds.
Press the LOW key for 2 seconds.
Press the FUNCTION key for 2
seconds.
Press the HOLD key.
Press the HOLD + FUNCTION keys
at the same time for 2 seconds.
When [LOCK] LED is OFF
Digital ZERO function activates
to set the indication to ZERO and
to return to the measuring mode.
High limit setting
activated.
Low limit setting
activated.
Function selecting
activated.
WGA-670B operates with preset
hold mode.
[LOCK] LED lights up and the
WGA-670B returns
measuring mode.
10
When [LOCK] LED is ON
No function is activated.
mode is
Only the set value is indicated.
mode is
mode is
No function is activated.
No function is activated.
[LOCK] LED lights out and
to the
setting modes becomes available.