Advertisement
3. For Brivo Onair accounts, make sure the account has been created and the control panel is
registered through Brivo Onair. If the control panel has not been registered by the dealer, the
installer may either contact Brivo Technical Support for assistance or simply register the panel
directly.
4. Verify that the Master Administrator and any other employee who will be accessing the system
have Internet access on a computer equipped with a supported Web browser.
Verify shipping contents.
1. Locate and check the contents of the Control Panel kit.
The ACS6000 control panel kit (B-ACS6000-MB) should contain the following parts:
a) 1 metal chassis. Packed inside the chassis are:
o
o
o
b) 1 cardboard box containing accessories, including:
© 2019 Brivo Systems LLC. All rights reserved.
An identify label to be adhered to the inside of the door.
1 cardboard box containing the MAIN BOARD and main board accessories.
o
1 MAIN BOARD
o
1 anti-static bubble wrap bag
o
1 MAIN BOARD Accessory Kit
▪
1 zipper bag
▪
2 metal oxide varistors
▪
16 2k ¼W 5% resistors
▪
5 ACS6000 style standoffs
▪
5 ACS5000 style standoffs
▪
1 dipole antenna – 2dB (Wi-Fi antenna)
▪
1 IPEX cable (Wi-Fi cable)
▪
1 earth ground screw
▪
1 4P power wire harness
o
1 identity label
1 cardboard box containing a power supply board (PSB) and PSB accessories.
o
1 power supply board
o
1 anti-static bubble wrap bag
o
1 power supply board accessories kit
▪
1 zipper bag
▪
4 screws
o
1 identity label
•
Pre-assembled CAN Bus cable (2 board connection cable for ACS6000, 4 board
connection cable for ACS6008)
•
1 AC transformer
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
8
Advertisement
