Advertisement
CONFIGURATION PROCEDURES
Connect a laptop to the MAIN BOARD's ADMIN Port (if required)
1. Connect a laptop to the ADMIN port on the MAIN BOARD using a standard Ethernet cable or a
patch cable.
a) The ADMIN port is a 10/100 Ethernet interface with RJ45 jack for connecting the MAIN
BOARD to a laptop or PC to gain access to the local administrative interface for debug
and manual configuration utilities.
b) The port uses auto-sensing technology to determine polarity, which permits either a
straight or crossover cable to be used between the board and the computer.
Connect the LAN to the MAIN BOARD (if required)
1. Connect the LAN to the MAIN BOARD according to the instructions in the Panel Networking
Admin Interface Guide.
a) The LAN port is a 10/100/1000 Ethernet interface with an RJ45 jack for connecting the
MAIN BOARD to a Local Area Network in order for it to gain connectivity to the Internet
and the appropriate server depending upon the version of MAIN BOARD.
© 2019 Brivo Systems LLC. All rights reserved.
Figure 28 - Connect Laptop to MAIN BOARD
Figure 29 - Connect LAN to MAIN BOARD
40
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
Advertisement
