Advertisement
Follow safety precautions.
WARNING: Fire Code
NEVER CONNECT A KEYPAD/READER OR LOCK TO DOORS WITHOUT FIRST
CONSULTING THE APPLICABLE FIRE CODE. You must consult with, and get approval
from, local fire officials before installing locks or devices on any doors that may be
fire exits. Use of egress push buttons may not be legal. Single action exits may be
required. Always obtain proper permits and approvals in writing before installing
equipment
WARNING: Fail Secure Mode
DO NOT INSTALL THE SYSTEM IN THE FAIL SECURE MODE UNLESS PERMITTED BY
THE LOCAL AUTHORITY HAVING JURISDICTION. Doing so may cause interference
with the operation of panic hardware.
WARNING: Heat and Noise
DO NOT INSTALL THE CONTROL PANEL IN AN AREA THAT COULD DROP BELOW 32
DEGRESS FAHRENHEIT OR EXCEED 120 DEGREES FAHRENHEIT. Doing so can cause
damage to components within the control panel.
DO NOT INSTALL THE CONTROL PANEL NEAR OR ON THE SAME CIRCUIT WITH
DEVICES THAT PRODUCE LARGE AMOUNTS OF ELECTRICAL NOISE. This includes
grinders, electric motors and blowers, electrical switch-gear and other electrically
noisy equipment. Electrical noise can interfere with panel operation. If it is not
possible to install the panel away from such sources of noise, it is advisable to
isolate it by using a high-quality UPS (Uninterruptible Power Supply) between the
AC Mains and the transformer.
© 2019 Brivo Systems LLC. All rights reserved.
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
12
Advertisement
