Advertisement
Brivo ACS6000 Installation Manual
Figure 18 - RS-485 Termination Switch Locations for Doors 1 and 2
NOTE: Door lock relays can be provided with power by using Door 1 Wet/Dry
Switch above Door Node 1 and Door 2 Wet/Dry Switch above Door Node 2.
To enable wet mode for Door 1, put the Door 1 Wet/Dry Select Switch in the Wet
position. To enable wet mode for Door 2, put the Door 2 Wet/Dry Select Switch in
the Wet position.
To enable dry mode for Door 1, put the Door 1 Wet/Dry Select Switch in the Dry
position. To enable dry mode for Door 2, put the Door 2 Wet/Dry Select Switch in
the Dry position.
Figure 19 - ACS6000 Wet/Dry Door Contact Switches for Doors 1 and 2
© 2019 Brivo Systems LLC. All rights reserved.
P-MAN-PUB-ACS6000 Installation Manual
31
Advertisement
