Advertisement
c)
Check each DOOR BOARD to confirm that the LOCAL HRTBT has come on and is blinking,
indicating that 12 VDC power is present.
d) Check each INPUT OUTPUT BOARD to confirm the LOCAL HRTBT has come on and is
blinking.
e) If any of these power indicators is not correct (i.e., the LED light does not come on or
does not begin blinking, check the connections from the power supply to each of the
circuit boards. If all connections are good but there is a still a problem with the power
indicator, contact Technical Support.
3. If ALL power indicators are correct, attach the back-up battery and check that ALL indicators
remain the same.
© 2019 Brivo Systems LLC. All rights reserved.
Figure 27 - Expansion Board Local Heartbeat
NOTE: A steady light is an indication of a problem, just as much as no light is.
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
39
Advertisement
