Advertisement
6. When snapped into place, you may feel and hear an audible click.
Ground the control chassis.
1. Wire the incoming Earth ground cable to the control chassis Earth ground screw located at the
bottom of the chassis.
2. Use 18 AWG or larger wire to connect the chassis to a suitable earth ground.
3. The ground contact point is in the lower panel area, near the hinge for the door and in front of
the power supply.
© 2019 Brivo Systems LLC. All rights reserved.
Figure 25 - ACS6000 Wi-Fi Integrated Circuit Location
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
37
Advertisement
