Program 400 - Plu Delete Programming - Sam4s ER-900 Series Operator's And Programming Manual

Program 400 – PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from both Z1 and Z2
reports, Stock reports and the Not Found PLU report.)
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
1. Turn the control lock to the PGM position.
2. To begin the program, enter 4 0 0, press the SUBTL key.
4 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:

Press a PLU key on the keyboard or scan the item.
PLU

Press the first PLU key that is to be deleted and press the last PLU key.
PLU PLU

Enter the number of the PLU you wish to delete and press the PLU key.

Enter the number of the first PLU in a range you wish to delete and press the
PLU key. Enter the last number in the range; press the PLU key.
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH
SUBTL
PLU
PLU PLU
P-Mode Programming • 139