Post Authorization - Sam4s ER-900 Series Operator's And Programming Manual

Post Authorization

Z-Mode: Enter 515, press SBTL
If electronic authorization is not approved and the merchant receives voice authorization, the
transaction can be entered into the batch with this function. Note that this function does not
adjust any other cash register totals or counters.
1. From Z-Mode: Enter 515, press SBTL.
2. Slide the card.
3. Enter the sale amount and then press CASH.
4. Enter the approval code and then press CASH.
5. The draft prints and the sale is added to the batch.
NOTE: The approval code is an alphanumeric entry. You must use the alpha code
chart to determine the numeric entries. For example, the approval code "VITAL8"
would be entered as "086 073 084 065 076 056" if you are using alpha code entry. If you
are using the alpha overlay, type the code on the overlay.
Sample Draft
240 • Integrated Payment Appendix
06/18/12 06:44
POST AUTH $25.00
************6781
APP: 123456
REF: 00003
REC NO : 62
TIP __________________________
TOTAL __________________________
X___________________________
I AGREE TO PAY ABOVE
TOTAL AMOUNT ACCORDING
TO CARD ISSUER AGREEMENT
SAM4s ER-900 Series Operator's & Programming Manual v.1.39