Program 720 - Datatran Message Program - Sam4s ER-900 Series Operator's And Programming Manual

Program 720 – Datatran Message Program
When a Datatran integrated payment appliance is connected, you can print a message of up
to four lines on the electronic payment draft receipt.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 2 0, press the SUBTL key.
3. Enter the number of the message line (1-4) you wish to program; press the X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 32 descriptors
5. Press the CASH key to finalize the program.
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
7 2 0 SUBTL
key.
X/TIME
on the overlay and press the SUBTL key. (Note: As you are entering descriptors
only the last 16 descriptors will display.)
Type up to 32
descriptor keys
If you are programming using descriptor codes, enter up to 32 three-character codes
and press the X/TIME key. (See "Descriptor Code Chart" on page 137.)
Enter up to 32
three-character
codes
CASH
SUBTL
SUBTL
P-Mode Programming • 203