Program 400 - Plu Delete Programming - Sam4s ER-380M Operation And Program Manual

Program 400 – PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports(including
Stock and PLU reports.)
94 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 4 0 0, press the SBTL key.
4 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
PLU
•
Press the first PLU key to be deleted, then press the last PLU key to be
deleted, or
PLU PLU
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range to be deleted and press the
PLU key, then enter the last number in the range, and press the PLU key.
Enter the PLU#,
up to 15 digits
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
CASH
SBTL
PLU
Enter the PLU#,
PLU
up to 15 digits
PLU
ER380