Sam4s ER-900 Series Operator's And Programming Manual page 36

Keyboard Legend
CASH
CHECK
CHECK CASHING
CHECK ENDORSEMENT
CHARGE (1-8)
CHECK #
CLEAR
36 • Operations
Description
Use to finalize cash sales. Calculates the sale total including tax
and opens the cash drawer. Change computation is allowed by
entering an amount before pressing the CASH key. The cash
drawer will open only if the amount tendered is equal to or
greater than the total amount of the sale. Post tendering is also
available should a second change calculation be necessary. Re-
enter the tendered amount and press the CASH key to show the
new change computation.
Press the CASH key a second time to issue a buffered receipt
when the receipt on/off function is OFF.
Use to finalize check sales. Calculates the sale total including
tax, finalizes the sale, and opens the cash drawer. Change
computation is allowed by entering an amount before pressing
the CHECK key. The cash drawer will open only if the amount
tendered is equal to or greater than the total amount of the sale.
Change issued will be subtracted from the cash-in-drawer total.
Use to exchange a check for cash. Cash-in-drawer and check-in-
drawer totals are adjusted.
Use to print a check endorsement message on an optional slip
printer after a check has been tendered. See "Programming the
Receipt/Check Endorsement Message" on page 197 to program
an endorsement message.
Use to finalize charge sales. Calculates the sale total including
tax, finalizes the sale, and opens the cash drawer. Change
computation is allowed by entering an amount before pressing
the CHARGE key. The cash drawer will open only if the
amount tendered is equal to or greater than the total amount of
the sale. Change issued will be subtracted from the cash-in-
drawer total.
The CHECK # key is used to begin a new, or access an existing
balance (hard check) or itemized bill (soft check).
Check track numbers that are entered manually may be set at a
fixed length of one to nine digits. Check track numbers assigned
automatically will begin with #1.
Existing checks are accessed by entering the check track number
and pressing the CHECK # key.
Use to clear entries made into the 10 key numeric pad or
X/TIME key before they are printed. Also used to clear error
conditions.
SAM4s ER-900 Series Operator's & Programming Manual v.1.39