Program 810 - Clerk Descriptor Programming - Sam4s ER-900 Series Operator's And Programming Manual

Program 810 - Clerk Descriptor Programming

Program descriptors by typing descriptors on the alpha keyboard overlay or by
entering three-digit alpha character codes. To enter descriptors by three-digit alpha
character codes you must set system option #31 (See "System Option Programming" on
page 141).
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 1 0, press the SUBTL key.
8 1 0
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 18
descriptors on the overlay and press the SUBTL key. (Note: As you are entering
descriptors only the last 16 descriptors will display.)
Type up to 18
descriptor keys
If you are programming using descriptor codes, enter up to 18 three-character
codes and press the SUBTL key.
Enter up to 18
three-character
codes
5. Press the CASH key to finalize the program.
CASH
SUBTL
SUBTL
SUBTL
P-Mode Programming • 193