Program 400 - Plu Delete Programming - Sam4s ER-430M Operation And Program Manual

Program 400 - PLU Delete Programming

NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock and
PLU reports.)
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 4 0 0, press the SBTL key.
4
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
•
Press the first PLU in a range of PLUs that are to delete then press the last PLU, or
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
•
Enter the number of the first PLU in a range of PLUs that are to delete and press the PLU
key. Enter the last PLU number in the range; press the PLU key, or
Enter the PLU#,
•
For a barcode item, scan the barcode.
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
100 • Contents
0 0 SBTL
PLU
PLU PLU
up to 15 digits
up to 15 digits
PLU
Enter the PLU#,
PLU
up to 15 digits
PLU
ER430M Electronic Cash Register AU