Self-Tests - Sam4s ER-900 Series Operator's And Programming Manual

Self-Tests

Self-tests can be performed to check the functions of the register.
Test
Printer
Display
Keyboard
Mode Lock
RS232C Port 1
RS232C Port 2
RS232C Port 3
RS232C Port 4
Endless
Printing
MCR Test
SD Card
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
1. Turn the control lock to the S position.
2. Enter the test number from the chart below and press the SUBTL key.
SUBTL
Key Sequence
10 SUBTL
11 SUBTL
12 SUBTL
13 SUBTL
14 SUBTL
24 SUBTL
34 SUBTL
44 SUBTL
16 SUBTL
17 SUBTL
19 SUBTL
Results/Instructions
The receipt printer generates a printer test pattern
and the drawer will open at the end of the test.
Displays illuminate a test pattern.
Press any key. The key's current function is
displayed. Turn the key lock to end the test.
Turn the mode lock to display the lock position.
Return the key to S to end the test.
Loop back connector must be connected.
Displays "232 Port Good" if successful; displays
"232 Port No Good" and sounds an error if
unsuccessful (or if loop back is not connected).
The receipt prints a sample ticket and opens the
cash drawer. The print is repeated until the key
lock is turned.
Swipe a card. The printer prints card track data.
Insert a SD card. Checks SD card operation.
S-Mode Programming • 97