Print Option Programming - Sam4s ER-900 Series Operator's And Programming Manual

Print Option Programming

Refer to the "Print Option Table" to review the print options. Read each option carefully to
determine if you wish to make any changes.
NOTE: Typical selections are set as default. After clearing memory all options settings
are automatically set to the default setting, therefore there is no need to program unless
you are setting an option other than the default.
Programming a Print Option
Print Option Flowchart
4 0
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
1. Turn the control lock to the PGM position.
2. Enter 4 0, press the SUBTL key.
3. Enter a print option address and press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more
than one decision to be made in an address, add the values representing your
choices for each decision and enter the sum. Press the SUBTL key.
5. Repeat from step 3 for each print option you wish to change.
6. Press the CASH key to end print option programming.
SUBTL
Option #
Repeat for each
Print Option
X/TIME SUBTL
Status
CASH
P-Mode Programming • 151