Program 400 - PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock and PLU
reports.)
1. Turn the control lock to the P position.
2. To begin the program, enter 4 0 0, press the SBTL key.
4
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
PLU
•
Press the first PLU keys that are to delete and Press the last PLU keys, or
PLU
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range you wish to delete and press the PLU key.
Enter the last PLU number in the range; press the PLU key.
Enter the PLU#,
up to 15 digits
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
122 • Program Mode Programming
0
0
SBTL
PLU
PLU
PLU
Enter the PLU#,
up to 15 digits
Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU
PLU