Rs-232 Communication Option Programs - Sam4s ER-900 Series Operator's And Programming Manual

RS-232 Communication Option Programs

You must define the device(s) attached to the RS-232C communications ports, and the
options for the device(s).
Port 1
(standard)
Port 2
(standard)
Port 3
(option)
Port 4
(option)
SAM4s ER-900 Series Operator's & Programming Manual v.1.39
1. Turn the control lock to the S position.
2. Enter 8 0 (enter 8 1 to program the second port; 8 2 for the optional third port;
and 8 3 for the optional fourth port) and press the SUBTL key.
3. Refer to the chart RS-232C option chart that follows and enter the address
number of the option you wish to program and press the X/TIME key. (For
example enter 5 to select the device that will be connected.)
4. Enter the value that represents your selection and press the CASH key. (for
example, if you are programming the device (address 5) enter 6 if the device is a
scanner.)
5. Repeat from step 2 for additional options you wish to program.
6. Press CASH to exit the program.
8 0 SUBTL
8 1 SUBTL
8 2 SUBTL
8 3 SUBTL
OPTION XTIME VALUE
OPTION XTIME VALUE
OPTION XTIME VALUE
OPTION XTIME VALUE
CASH CASH
CASH CASH
CASH CASH
CASH CASH
S-Mode Programming • 103