Table of Contents
Advertisement
InfiniBand FDR Switch Platform Hardware User Manual
Notch for upper
bracket washer
Set this even with
the top of the shelf
3. Screw the cable holder onto the rack using the screws provided.
4. Repeat steps 1- 3 for the second cable holder.
5. Install the shelves. The cable support shelves just sit on the cable holders.
6. Use the holes in the shelves to tie down the cables individually or in bundles.
Mellanox Technologies
Figure 12: Cable Holder Placement
L
Use Velcro ties to tie down the cables. Electric cable ties are not recommended.
28
Advertisement
Table of Contents
