Table of Contents
Advertisement
InfiniBand FDR Switch Platform Hardware User Manual
Place to connect the
chassis rail slide
1. Place the cable holder next to the rack, on the connector side of the chassis, and iden-
tify the holes where the caged nuts are to be placed.
2. Set the bottom of the cable holder at the level of the shelf.
Mellanox Technologies
Figure 11: Inserting the Caged Nuts for the Cable Holder
The cable holders should go to the outside of the vertical supports.
If the cable holder is not set properly the upper bracket will not line up with the cable
holder.
5
4
Place caged nuts here
3
2
1
Shelf
27
Advertisement
Table of Contents
