Figure 6: Inserting The Caged Nuts; Figure 7: Slide The Rail Into The Rail Slide - Mellanox Technologies SX10XX Hardware User Manual

Slide the rail into the rail slide.
Step 4.
Using two of the bolts for each corner, install the rails and rail slides in the rack. Do not tighten
Step 5.
the bolts yet.
16 Mellanox Technologies

Figure 6: Inserting the Caged Nuts

Figure 7: Slide the Rail into the Rail Slide

This side of the rail kit goes on the side of the rack you will
slide the system into. This is the same side of the system that
will be next to the vertical support.
Side you will slide
the system into
Second side
Installation