Konica Minolta bizhub PRO C5501 User Manual page 61

Preparation for use
Manually conserving energy
Follow the procedure below to operate Power Save function (Low Power or Shut-Off) manually.
1
Press [Power Save] for one second or longer, then release it.
The following message will be displayed.
Using Auto Shut-Off:
Auto Shut Off Mode/Press any
key or touch screen to exit
Using Auto Low Power:
Low Power Mode/Press any key or
touch screen to exit
2
Power Save will be activated.
The Power Save LED will be lit and the LCD screen will be turned off.
Reminder
Be sure to press [Power Save] for one second or longer, otherwise the following message will be
displayed and the Shut-Off (Low Power) mode will not be activated.
Press POWER SAVER more than one second,
then release it for Shut off mode
Keep POWER SAVER pressed more than
one second to enter Low power mode
!
Detail
The machine is initially set to activate the Shut-Off function manually.
To use Low Power instead, see the User's guide – POD Administrator's reference.
Limiting machine usage (Weekly timer)
The Weekly Timer function turns a copier on and off at the time specified by the administrator.
When a machine is in OFF condition under control of Weekly Timer, the Power Save LED is lit and machine
operation is unavailable.
!
Detail
For details of the Weekly Timer function, see the User's guide – POD Administrator's reference.
bizhub PRO C5501
2
2-15