Troubleshooting
Memory overflow in reserve job
When memory overflow occurs while scanning for the reserve job, the machine immediately stops and
displays one of the following popup menus.
1
Take either of the following actions.
–
To delete all the scanned data and discontinue the reserve job, touch [Stop Job].
–
To give up further scanning for the reserve job but print out all the data already scanned into
memory, touch [Stop Scan].
–
To print out all the data already scanned for the reserve job, and continue scanning as the current
job gradually enables memory for new data, touch [Continue].
–
When selecting [Stop Scan] or [Continue], check the output sheets and then reload the original to
continue the job.
2
Press [Start] on the control panel.
–
The machine starts scanning for the reloaded original to complete the job.
Note
If the reserve job settings include Booklet Pagination, the [Stop Scan] key will not appear.
bizhub PRO C5501
5
5-11