Application functions
6
Touch [OK] twice to complete the setting.
–
To restore the previous setting, touch [Cancel].
–
To release the Stamp/Image Overlay function with the current setting remained, touch
[Function Off].
7
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Stamp/Overlay] key displayed under the
[Application] key.
Use this key to jump to the subsequent screen to make any setting change.
8
Enter the desired print quantity from the control panel keypad, then press [Start].
The machine will start printing when ready for output.
bizhub PRO C5501
11
11-57