Paper Setting - Konica Minolta bizhub PRO C5501 User Manual

9
9.6

Paper setting

Each paper tray has been preset with paper size and other specifications. The setting items are as follows:
- Paper Type
- Name
- Weight
- Both Sides Adjustment
- Speed Setting
- Hole-Punch
- Colored Paper
- Air Assist (Tray 4 of Large Capacity Unit LU-202 only)
Paper size
The machine can be set to detect the standard paper size when loaded or to accommodate a specific size
(custom size or tabbed paper size).
The tray specified as Standard or Tab Paper allows Auto Paper Select, Auto Zoom, and Rotation to function.
The tray specified as Custom cannot be used when these functions are activated.
Paper specifications
Using [Paper Setting] on the Copy Screen or Machine Status Screen, paper specifications preset for each
tray can temporarily be altered, new specifications can be registered, and registered specifications can be
recalled.
The following describes how to use Auto Paper Select, Auto Zoom, and Rotation functions, and how to
change/register the paper size and other specifications for each tray as well as to recall registered
specifications.
Improving monk on large-sized paper or feedability of small-sized thick paper in duplex printing
If printed image on large-sized paper shows unevenness, or small-sized thick paper has difficulty in feeding
when duplex-printed, adjust fixing pressure of the fixing unit to make improvement on it.
!
Detail
The User Setting allows you to delete the registered paper specifications. It also gives efficiency in
registering more than one sort of specifications. For details, see the User's guide – POD Administrator's
reference.
The following describes how to use Auto Paper Select, Auto Zoom, and Rotation functions, and how to
temporarily change the paper size and other specifications registered for each tray as well as to recall preset
specifications.
9-30
Basic job settings
bizhub PRO C5501