Konica Minolta bizhub PRO C5501 User Manual page 114

5
Symptom
"PLEASE CHECK ORIGINAL"
SHEET INSERTION RESULT IS
NOT AS EXPECTED
FINISHER STAPLE RESULT IS
NOT AS EXPECTED
COPIES SKEW IN THE STAPLED
SETS
USING PUNCH, COPIES CAN-
NOT BE PUNCHED
COPIES CANNOT BE STAPLED
OR PUNCHED IN POSITION
5-14
Remedy
This message appears when the copier detects a non-standard paper size on the
original glass.
Select paper size and press [Start]. 1.000 magnification will be selected automat-
ically.
If this message continues to be displayed after selecting paper size, select 1.000
magnification, even if it is already indicated, then press [Start]. If desired, ask
your service representative to enable the machine to default to 1.000 magnifica-
tion in this situation.
Blank insertion: Be sure manuscript originals do not already include blank sheets
in the locations designated for sheet insertion.
Print insertion: To ensure that chapter sheets in 1-2 mode always appear on the
right hand side in the finished set, insertion sheets must be designated on the
page setting screen with odd numbers, not even. If required, make an even num-
bered original page odd by inserting a blank sheet in front of that page, so that
the blank sheet is even and the insertion sheet is odd.
The 2 staple position functions only on copy paper that is loaded vertically (por-
trait style).
Check to see if Rotation functions. Release it, if necessary.
Check to see if copy paper is excessively curled in the tray. Reload the copy pa-
per upside down.
Check to see if large-sized copies meet the secondary (sub) tray when fully out-
put before being stapled. Release the lock of the secondary (sub) tray, then
slightly lift it upward.
Check to see if the Punch Waste Basket indicator lights in red on the Machine
Status Screen.
Empty the waste basket.
Check to make sure the side guide plates are securely aligned to the copy paper
in the paper tray to be used.
Troubleshooting
bizhub PRO C5501