Konica Minolta bizhub PRO C5501 User Manual page 340

12
12.4.3 Collate/uncollate output to the secondary (sub) tray
A machine with Finisher FS-607 installed is set to Collate output to the primary (main) tray by default,
regardless of whether or not to be equipped with other optional devices. Change the output tray and select
the desired output mode by following the procedure below.
!
Detail
For detailed specifications, see page 3-3 and page 7-6.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
3
Select the secondary (sub) tray as the output tray.
– Touch [Output Tray] to display the Output Tray Selection Screen.
– Touch the tray position key
12-20
of the secondary (sub) tray to highlight it, then touch [OK].
Output applications
bizhub PRO C5501