Overlaying Image Onto Printed Pages: Image Overlay - Konica Minolta bizhub PRO C5501 User Manual

Application functions
11.18

Overlaying image onto printed pages: Image overlay

Use this function to scan an image, then overlay the image onto each page copied in the job.
1
Position the overlaying original.
– Position a sheet of original faceup in the ADF or facedown on the original glass.
2
Touch [Application] on the Copy Screen.
3
Touch [Stamp/Image Overlay] on the Application Screen.
4
Touch [Image Overlay] to highlight it.
5
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Stamp/Image Overlay function with the current setting remained, touch [Function
Off].
6
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Stamp/Overlay] key displayed under the
[Application] key.
This key can also be used to display the Application Screen for making setting change.
Auto Zoom and Auto Paper Select are released and e1.0 magnification is selected automatically.
The [Separate Scan] key on the Copy Screen also appears highlighted to show that the Separate Scan
mode is automatically selected.
7
Select any other copy conditions, as desired.
8
Press [Start] on the control panel.
The original image will be scanned into memory.
9
Position the original to be overlaid.
– Position the original either in the ADF or on the original glass.
bizhub PRO C5501
1st scanned original
Copies in Overlay mode
Originals scanned
2nd and later
11
11-67